Product Data Sheet
Product Sinopec L-TSA Turbine Oil
Summary Product description
Sinopec L-TSA Turbine Oil is available in ISO viscosity grades 32, 46 and 68.
Formulated with high-quality base oil and selected additives, it offers good
oxidation stability and corrosion protection along with good demulsibility,
antifoaming and air release properties.
Applications
Sinopec L-TSA Turbine Oil is suitable for use in:
Steam turbines used in industrial power generation.
Large to moderate marine steam turbine propulsion machinery and associated auxiliary equipment.
Industrial steam turbines, gas turbines and water turbines.
Circulating systems, anti-friction bearings, enclosed gears, hydraulic units and other industrial applications, providing
there is no requirement for antiwear additives.
Features and benefits
Good oxidation stability prolongs the service life of the oil and increases service intervals.
Good air release properties protect against air entrainment and ensure optimum oil film thickness, protecting
equipment components.
Good antifoaming properties avoid the build up of foam, and reduce oil leakage from the system.
Good water separation properties ensure that any water contamination can be easily separated from the oil, protecting
equipment against rusting and corrosion and extending oil life.
Anti-rust and corrosion prevention properties further protect equipment from rusting and corrosion, and extend
equipment life.
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Product Data Sheet
Typical data
Sinopec L-TSA Turbine Oil
ISO viscosity grade 32 46 68
Kinematic viscosity of base oil, ASTM D 445
cSt @ 40°C 31.27 44.42 66.4
cSt @ 100°C 5.192 6.386 8.182
Viscosity index of base oil, ASTM D 2270 93 92 92
Air release at 50°C, min, ASTM D 3427 2.1 2.7 5
Foaming characteristics, sequences 1, 2 and 3, ASTM D 892 10/0 10/0 10/0
20/0 20/0 20/0
10/0 10/0 10/0
Demulsibility @ 54°C, time to 3 ml emulsion, min, ASTM D 1401 8 10 15
Neutralisation number, mg KOH/g, ASTM D 974 0.07 0.08 0.09
Oxidation stability, time to 2 mg KOH/g, hours, ASTM D 943 >2,500 >2,000 >1,500
Oxidation stability, RPVOT @ 150°C, min, ASTM D 2772 400+ 400+ 400+
Rust prevention, ASTM D 665
distilled water pass pass pass
synthetic sea water pass pass pass
Copper corrosion, 3 hours @ 100°C, ASTM D 130 1b 1b 1b
Pour point, °C, ASTM D 97 –12 –12 –12
Flash point (COC), °C, ASTM D 92 200 210 222
Density @ 15°C, kg/l, ASTM D 4052 0.8653 0.8687 0.8705
These data are given as an indication of typical values and not as exact specifications.
Industry and OEM specifications
Sinopec L-TSA Turbine Oil meets the performance requirements of the following industry specifications:
ASTM 4304 Rev A Type I
DIN 51515 L-TD
DIN 51524 Part 1
1
GB 11120-89 (L-TSA)
JIS K-2213 Type 2 w/add
1
Note: ‘GB’ standards are the National Standards of the People’s Republic of China.
Sinopec L-TSA Turbine Oil meets the performance requirements of the following OEM specifications:
Alstom Power HTGD 90117
GE GEK-28143A
GE GEK-46506D
Siemens Power Generation TLV 9013 04
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Product Data Sheet
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The
information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures
and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and
OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best
practice is available from your local distributor.
Product and environmental safety
This product should not cause any health problems when used in the applications suggested and when the guidance provided
in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs
are available from your local distributor. Do not use the product in applications other than those suggested.
As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be
sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.
The SINOPEC trademark is registered and protected in Australia.
Issued: September 2011
© Sinopec 2011 32_Sinopec-L-TSA Turbine Oil
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Houghton Rustkote 945Giá khuyến mại: Liên hệ
Houghton Rustkote 943Giá khuyến mại: Liên hệ
Falcon S-101A Dầu chống rỉ chất lượng cao – High Quality Anti-rust AgentGiá khuyến mại: Liên hệ
Falcon S-350 Chất chống gỉ bôi trơn đa năng – Multipurpose lubricating antirust agentGiá khuyến mại: Liên hệ
Falcon S-103C Dầu chống rỉ chất lượng cao – Green color long period anti-rust agentGiá khuyến mại: Liên hệ