• Dầu thủy lực Sinopec L-HM Oil 32 46 68
      • Xuất xứ: N/a
      • Kho hàng: N/a
      ▪ Sinopec L-HM Oil được tinh chế từ dầu gốc khoáng cao cấp và các phụ gia đa dụng, được sử dụng rộng rãi cho hệ thống thủy lực trong ngành công nghiệp, hàng hải, thiết bị máy móc di động...
      Giá khuyến mại: Liên hệ
      Hotline: 0916 652 996
  •  
     
                                                                                         Product Data Sheet 
     
                        Product              Sinopec Antiwear Hydraulic Oil L-HM 
     
                        Summary              Product description 
     
                                             Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear 
                                             lubricants blended using selected and carefully refined high-quality mineral 
                                             oils, combined with a multifunctional additive system and available in a wide 
                                            viscosity range from ISO Grade 32 to 150. This line of oils has been designed 
                                             to meet the requirements of major hydraulic pump manufacturers, and its 
                                             applications include hydraulic systems used in industrial and marine 
                                             applications as well as in mobile machinery. 
     
         Applications 
         Sinopec Antiwear Hydraulic Oil L-HM is suitable for use in: 
     
              •    Hydraulic applications in a wide variety of industrial, marine and mobile equipment. 
              •    Vane and gear pumps operating under high loads, as recommended by pump manufacturers. 
              •    Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers. 
     
         Features and benefits 
              •    High-quality base oils combined with multifunctional additive technology provide outstanding antiwear properties, rust 
                   protection, low varnish and deposit formation, good demulsibility, oxidation resistance, good antifoam properties and 
                   fast air release properties, to protect and extend the life of hydraulic pumps and systems. 
              •    Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking. 
              •    The wide selection of viscosity grades ensures that the optimum viscosity can be used for any hydraulic system 
                   operating temperature. 
              •    Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid 
                   leakage. 
     
                                              The information contained herein is subject to change without notification due to continuing 
                                              research & development therefore properties may be subject to slight variations. 
     
    PERFORMANCE IN MOTION 
     
                                                                                        Product Data Sheet 
     
         Typical data 
     
         Sinopec Antiwear Hydraulic Oil L-HM 
     
         ISO viscosity grade                                       32            46             68             100            150 
     
         Kinematic viscosity, ASTM D 445 
     
            cSt @ 40°C                                             32.13         45.88          68.16          100.4          150.6 
     
            cSt @ 100°C                                            5.43          6.77           8.83           11.26          15.28 
     
         Viscosity index, ASTM D 2270                              103           102            103            98            99 
     
         Air release at 50°C, mins, ASTM D 3427                    4             5.2            8              –             – 
     
         Foaming characteristics, sequences 1, 2 and 3,            10/0          10/0           15/0           20/0           10/0 
         ASTM D 892 
                                                                   15/0          10/0           10/0           10/0           10/0 
     
                                                                   10/0          20/0           15/0           10/0           10/0 
     
         Neutralisation number, mg KOH/g, ASTM D 974               0.69          0.72           0.71           0.72          0.69 
     
         FZG test (A/8.3/90), fail load stage, DIN 51345           12            12             12             12             12 
     
         Rust prevention, ASTM D 665 
     
            distilled water                                        pass          pass           pass           pass          pass 
     
            synthetic sea water                                    pass          pass           pass           pass          pass 
     
         Copper corrosion, 3 hours @ 100°C, ASTM D 130             1b            1b             1b             1b             1b 
     
         Water separability, ASTM D 2711                           13 (54°C)     15 (54°C)      13 (54°C)      12 (82°C)      15 (82°C) 
     
         Pour point, °C, ASTM D 97                                 –15           –15            –14            –13           –12 
     
         Flash point (COC), °C, ASTM D 92                          228           230            234            238           260 
     
         These data are given as an indication of typical values and not as exact specifications. 
     
         Industry and OEM specifications 
     
         Sinopec Antiwear Hydraulic Oil L-HM meets the performance requirements of the following industry 
         specifications: 
     
         DIN                                    51524 Pt 2 
     
             1 
         GB                                     11118.1-94 (L-HM) Premium 
     
         ISO                                    11158 (L-HM) 
     
         1 
          Note: ‘GB’ standards are the National Standards of the People’s Republic of China. 
     
         Sinopec Antiwear Hydraulic Oil L-HM meets the performance requirements of the following OEM 
         specifications: 
     
         Cincinnati Lamb                        P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46) 
     
         Parker Denison                         HF-0, HF-1, HF-2 (ISO 32, ISO 46, ISO 68) 
     
         Eaton Vickers                          M-2950-S (ISO 46) 
     
         Sinopec Antiwear Hydraulic Oil L-HM holds the following OEM approvals: 
     
         Cincinnati Lamb                        P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46) 
     
                                             The information contained herein is subject to change without notification due to continuing 
                                             research & development therefore properties may be subject to slight variations. 
     
    PERFORMANCE IN MOTION 
                                                                            
     
     
     
                                                                                             Product Data Sheet 
     
         Parker Denison                            HF-0, HF-1, HF-2 (ISO 32, ISO 46, ISO 68) 
     
         Eaton Vickers                             M-2950-S (ISO 46) 
     
         Accuracy of information 
         Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The 
         information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures 
         and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and 
         OEM specifications referred to on this data sheet. 
     
         Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best 
         practice is available from your local distributor. 
     
          Product and environmental safety 
         This product should not cause any health problems when used in the applications suggested and when the guidance provided 
         in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs 
         are available from your local distributor. Do not use the product in applications other than those suggested. 
     
         As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be 
         sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations. 
     
         The SINOPEC trademark is registered and protected in Australia. 
     
         Issued: September 2011 
     
         © Sinopec 2011                                                                                                     14_Sinopec-Antiwear-Hydraulic-Oil-L-HM 
     
                                                The information contained herein is subject to change without notification due to continuing 
                                                research & development therefore properties may be subject to slight variations. 
     
    PERFORMANCE IN MOTION 
                                                                                

Sản phẩm nổi bật

Hàng mới về

Thống kê web

Dầu thủy lực sinopec