Bỏ qua tới nội dung

Dầu máy biến áp Sinopec Transformer Oil

Giá theo quy cách và số lượng. Gọi hoặc nhắn Zalo để nhận báo giá.

Product Data Sheet

Product Sinopec Transformer Oil

Summary Product description

Sinopec Transformer Oil is a series of products blended using highly refined

mineral oil and a selected antioxidant. It is designed for insulating and cooling

transformers, oil-immersed switch-gear and other electrical insulating

applications. There are four grades, 10, 25, 40 and 45, which are selected on

the basis of their low-temperature performance. None of the grades contain

harmful polychlorinated biphenyls (PCBs).

Applications

Sinopec Transformer Oil is suitable for use in:

• Oil-filled transformers, operating at 330 kV or less, where it acts as a non-conducting insulating and cooling medium.

• Oil-immersed switch-gear.

• Other electrical insulating applications.

Features and benefits

• Excellent dielectric (insulating) properties, effectively prevent discharge in an electric field.

• Low viscosity and low density lead to the oils having good cooling properties and good heat transfer characteristics at

room temperature and below, and so ensure effective cooling of transformer core and coils.

• Even at very low temperatures the oil viscosity remains low, and therefore allows the transformer to be started up

under very cold conditions without problem.

• Excellent oxidation stability characteristics are provided by the stable base oil together with the high-performance

oxidation inhibitor system, and prevent the formation of acidic material and sludge in service, extending the life of the

oil.

• All four grades meet the requirements of IEC 60296:2003 for transformer oils.

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Product Data Sheet

Typical data

Sinopec Transformer Oil

Grade 10 25 40 45

Kinematic viscosity, ASTM D 445

cSt @ 40°C 8.93 9.34 9.91 9.25

cSt @ -10°C - 116.0 - -

cSt @ -30°C - - 423.4 753.0

Neutralisation number, mg KOH/g, ASTM D 664 0.46 0.22 0.59 0.63

Oxidation stability, 164 h @ 120°C, IEC 61 125C

total acidity, mg KOH/g 0.04 0.02 0.0822 0.0218

sludge, wt% 0.01 0.008 0.0075 0.0175

Corrosive sulfur, ASTM D 1275 B not corrosive not corrosive not corrosive not corrosive

Breakdown voltage, kV, IEC 60156 50 47 50 53

Dielectric dissipation factor @ 90°C, IEC 60247 0.0009 0.0007 0.008 0.0001

Interfacial tension, mN/m 49.1 47.3 47.1 48.7

Pour point, °C, ASTM D 97 -12 -27 -45 -51

Flash point (PMCC), °C, ISO 2719 162 153 158 154

Density @ 20°C, kg/l, ASTM D 4052 0.8486 0.8330 0.8378 0.8354

These data are given as an indication of typical values and not as exact specifications.

Industry and OEM specifications

Sinopec Transformer Oil meets the performance requirements of the following industry specifications:

1

GB 2536-90 (Sinopec 10, 25 and 45 Transformer Oil)

IEC 60296-2003 (Sinopec 10, 25, 40 and 45 Transformer Oil)

Sinopec Q/SH 303 525-2009

1

Note: ‘GB’ standards are the National Standards of the People’s Republic of China.

Sinopec Transformer Oil holds the following formal OEM approvals:

ABB Specification 1ZBA117001-1:

HI-B (Sinopec 25 Transformer Oil)

HI-A (Sinopec 45 Transformer Oil)

Siemens TUN 901 293 (2007) (Sinopec 25 and 45 Transformer Oil)

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Product Data Sheet

Accuracy of information

Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The

information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures

and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and

OEM specifications referred to on this data sheet.

Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best

practice is available from your local distributor.

Product and environmental safety

This product should not cause any health problems when used in the applications suggested and when the guidance provided

in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs

are available from your local distributor. Do not use the product in applications other than those suggested.

As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be

sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.

The SINOPEC trademark is registered and protected in Australia.

Issued: September 2011

© Sinopec 2011 27_Sinopec-Transformer-Oil

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Liên hệ với chúng tôi

Cần tư vấn chọn dầu hoặc báo giá theo số lượng, để lại số điện thoại, kỹ thuật Sơn Lâm gọi lại trong giờ làm việc.

Zalo Messenger Gọi ngay