Bỏ qua tới nội dung

Dầu thủy lực Sinopec L-HM Oil 32 46 68

Giá theo quy cách và số lượng. Gọi hoặc nhắn Zalo để nhận báo giá.

Product Data Sheet

Product Sinopec Antiwear Hydraulic Oil L-HM

Summary Product description

Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear

lubricants blended using selected and carefully refined high-quality mineral

oils, combined with a multifunctional additive system and available in a wide

viscosity range from ISO Grade 32 to 150. This line of oils has been designed

to meet the requirements of major hydraulic pump manufacturers, and its

applications include hydraulic systems used in industrial and marine

applications as well as in mobile machinery.

Applications

Sinopec Antiwear Hydraulic Oil L-HM is suitable for use in:

• Hydraulic applications in a wide variety of industrial, marine and mobile equipment.

• Vane and gear pumps operating under high loads, as recommended by pump manufacturers.

• Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers.

Features and benefits

• High-quality base oils combined with multifunctional additive technology provide outstanding antiwear properties, rust

protection, low varnish and deposit formation, good demulsibility, oxidation resistance, good antifoam properties and

fast air release properties, to protect and extend the life of hydraulic pumps and systems.

• Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking.

• The wide selection of viscosity grades ensures that the optimum viscosity can be used for any hydraulic system

operating temperature.

• Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid

leakage.

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Product Data Sheet

Typical data

Sinopec Antiwear Hydraulic Oil L-HM

ISO viscosity grade 32 46 68 100 150

Kinematic viscosity, ASTM D 445

cSt @ 40°C 32.13 45.88 68.16 100.4 150.6

cSt @ 100°C 5.43 6.77 8.83 11.26 15.28

Viscosity index, ASTM D 2270 103 102 103 98 99

Air release at 50°C, mins, ASTM D 3427 4 5.2 8 - -

Foaming characteristics, sequences 1, 2 and 3, 10/0 10/0 15/0 20/0 10/0

ASTM D 892

15/0 10/0 10/0 10/0 10/0

10/0 20/0 15/0 10/0 10/0

Neutralisation number, mg KOH/g, ASTM D 974 0.69 0.72 0.71 0.72 0.69

FZG test (A/8.3/90), fail load stage, DIN 51345 12 12 12 12 12

Rust prevention, ASTM D 665

distilled water pass pass pass pass pass

synthetic sea water pass pass pass pass pass

Copper corrosion, 3 hours @ 100°C, ASTM D 130 1b 1b 1b 1b 1b

Water separability, ASTM D 2711 13 (54°C) 15 (54°C) 13 (54°C) 12 (82°C) 15 (82°C)

Pour point, °C, ASTM D 97 -15 -15 -14 -13 -12

Flash point (COC), °C, ASTM D 92 228 230 234 238 260

These data are given as an indication of typical values and not as exact specifications.

Industry and OEM specifications

Sinopec Antiwear Hydraulic Oil L-HM meets the performance requirements of the following industry

specifications:

DIN 51524 Pt 2

1

GB 11118.1-94 (L-HM) Premium

ISO 11158 (L-HM)

1

Note: ‘GB’ standards are the National Standards of the People’s Republic of China.

Sinopec Antiwear Hydraulic Oil L-HM meets the performance requirements of the following OEM

specifications:

Cincinnati Lamb P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46)

Parker Denison HF-0, HF-1, HF-2 (ISO 32, ISO 46, ISO 68)

Eaton Vickers M-2950-S (ISO 46)

Sinopec Antiwear Hydraulic Oil L-HM holds the following OEM approvals:

Cincinnati Lamb P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46)

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Product Data Sheet

Parker Denison HF-0, HF-1, HF-2 (ISO 32, ISO 46, ISO 68)

Eaton Vickers M-2950-S (ISO 46)

Accuracy of information

Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The

information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures

and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and

OEM specifications referred to on this data sheet.

Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best

practice is available from your local distributor.

Product and environmental safety

This product should not cause any health problems when used in the applications suggested and when the guidance provided

in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs

are available from your local distributor. Do not use the product in applications other than those suggested.

As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be

sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.

The SINOPEC trademark is registered and protected in Australia.

Issued: September 2011

© Sinopec 2011 14_Sinopec-Antiwear-Hydraulic-Oil-L-HM

The information contained herein is subject to change without notification due to continuing

research & development therefore properties may be subject to slight variations.

PERFORMANCE IN MOTION

Liên hệ với chúng tôi

Cần tư vấn chọn dầu hoặc báo giá theo số lượng, để lại số điện thoại, kỹ thuật Sơn Lâm gọi lại trong giờ làm việc.

Zalo Messenger Gọi ngay